MagTek SWIPE & PARK MT - Manual (Page 12)

Swipe and Park MT Hybrid Reader
6
Figure 2-2. Optional PCB Mounting
If an optional PCB side mounting is to be used,
allow for a minimum clearance to the chassis.
Depending on the mounting holes selected, use
spacers 1, 2, or 3:
Minimum height for spacer 1 is .250” (6.35 mm)
Minimum height for spacer 2 is .83” (4.65 mm)
Minimum height for spacer 3 is .140” (3.56 mm)
Figure 2-3. Spacers for PCB Mounting