MagTek SWIPE & PARK MT - Manual (Page 14)

Swipe and Park MT Hybrid Reader
8
CABLES
Figure 2-6 shows the location of Pin 1 on the flex cable with respect to the Reader. The pin list for the
flex cable is shown in Figure 2-7. Wiring for the head is shown in Appendix A.
Figure 2-6. Flex Cable Pin 1 Location
nCARDSEATED
SWITCH
J2
1
10PIN
3
2
4
5
6
7
8
9
SC_C2
SC_C1
SC_C6
SC_C8
SC_C4
SC_C3
SC_C7
10
Note: The Host Interface must provide
pull-up for card-seated switch.
Figure 2-7. Flex Cable Pin List
Figure 2-8 shows the pitch and mating connector of the flex cable:
.433" + .004" -.002"
.039" +/- .006"
Termination Detail.
Foil Side Shown.
Mates with Molex
71220 (or equivalent)
Scale: None
.039" (1.0 mm pitch)
.012" x .012"
Chamfer or Radius
2 Places
1 10
Figure 2-8. Pitch and Mating Connector