MagTek HALF CARD PORT - Manual (Page 10)

Half Card Port Powered Insertion Reader
2
CONFIGURATIONS
Table 1-1 lists the part number, single or dual head, head positions, tracks, and cable type.
Note
Additional features have been incorporated into the new version of
the Half Card Insert Reader (generally available after December
2006). In the new version, the firmware part number will be
reported as 21088842. This new reader was designed to be a drop
in replacement for the old reader. However, there are some slight
behavior differences mentioned throughout this manual. This new
reader also added a number of features that are mentioned
throughout this manual. The part number of the readers did not
change for the new readers, however the revisions did change.
The enhancements included in this new version are identified
within this document with the word “new”.
Table 1-1. Configuration
Part Number Heads Head Position* Track Bezel Cable Type
21066000 Single Head Down/Right 1-2 Black No Cable
21066008 Single Head Down/Right 1-2 White 6’ Cable
21066019 Single Head Down/Right 1-2 White No Cable
21066020 Single Head Down/Right 1-2 Black 6’ Cable
21166021 Single Head Down/Right 1-2 White No electronics,
no cable
* The magnetic stripe is inserted in the same orientation as the head position; for example,
head down/right means magnetic stripe down or to the right.