MagTek P-SERIES TTL - Manual (Page 7)

1
SECTION 1. FEATURES AND SPECIFICATIONS
The P-series Insertion Readers are designed for use at fuel pumps or other harsh outdoor
environments that require a moisture resistant reader. The Readers are electronically TTL-level
compatible and mechanically compatible with the industry-standard footprint. The Readers are
configured to ISO standard 7811 for reading Tracks 1 and 2 on the magnetic stripe.
FEATURES
Features of the Readers are as follows:
•
Dual Read-Head Capability - allows for easier card orientation when inserted into the
Reader. Also supports single read head with no chassis modification
•
Beam-mounted Read-heads - improves card tracking capabilities for reading warped or
wavy cards
•
Sealed Chassis Design - provides superior resistance to moisture
•
AGC (Automatic Gain Control) in MagTek IC's - enhances mag-stripe read performance
•
Ruggedized Chassis and Bezel Material - improves temperature and impact performance
CONFIGURATIONS
Table 1-1 lists the part numbers, number of heads, bezel, and connector information.
Table 1-1. Configurations
Part Number Heads Tracks Bezel I/O Connector
21065114 2 1, 2 Extended Arm Bezel 9-pin Header
21065117 2 1, 2 Extended Arm Bezel 7-pin Header
Accessories
The accessories are as follows:
Part Number Description
21064519 Angle Bracket Mounting Kit