MagTek MT-211232 RS-232 3-TRACK - Manual (Page 14)

RS-232 Swipe Reader, 3-Track
8
SPECIFICATIONS
Table 1-6 lists the specifications for the MT211232, RS-232 Swipe Reader, 3 Track.
Figure 1-5 shows the dimensions.
Table 1-6. Specifications
OPERATING
Reference Standards ANSI/ISO/CDL/AAMVA
Power Input 9 Volt, 300 mA DC Adaptor (Included), 115 VAC, 60 Hz
Power Consumption 115 mA at 9 VDC
Recording Method Two-frequency coherent phase (F2F)
Message Format ASCII
Card Speed 3 to 50 IPS at 75 BPI or 210 BPI (7.6 to 127 cms/sec)
MTBF Electronics: 125,000 hours. Head: 1,000,000 passes
Flammability Meets UL 94V-0
MECHANICAL
Dimensions Length 6 1/2”, Width 1 3/4”, Height 1 5/8”
Weight: Reader 7 oz. Adaptor: 11oz.
Cable length 6’ (1.82 meters) Maximum length is 50’ (15 meters)
Connector 9 pin D female, (May require an optional 25-pin adaptor), P/N 78200018
ENVIRONMENTAL
Temperature
Operating
32
o
F to 131
o
F (0
o
C to 55
o
C)
Storage -22 o F to 158 o F (-30 o C to 70 o C)
Humidity
Operating 10% to 90% noncondensing
Storage Up to 100% noncondensing
Altitude
Operating 0-10,000 ft. (0-3,048 m.)
Storage 0-50,000 ft. (0-15,240 m.)