MagTek PORT POWERED SWIPE READER - Manual (Page 2)

ii
Copyright
©
1997-2010
MagTek
®
, Inc.
Printed in the United States of America
Information in this document is subject to change without notice. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of MagTek, Inc.
MagTek is a registered trademark of MagTek, Inc.
REVISIONS
Rev
Number
Date Notes
1 11 Dec 97 Initial Release
2 18 Dec 97 Sec 1 Changed spec Dimensions; Sec 1, 3 Changed illustrations for clarity.
3 11 May 98 Sections 1, 2, and 3 revised to reflect latest firmware revisions. Sec 4 deleted.
4 15 Jun 98 Two part numbers added.
5 1 Mar 99 Sec 1, Added 3 part numbers, changed specs, Changed Dimensions Figure 1-3,
removed Figure 1-4, Mounting Dimensions, added MagTek Windows Drivers; Added
note to Table 1-1. Section 2, added mounting instructions and Figure 2-1, Mounting
Dimensions. Section 3, added 3 track symbols to Table 3-1 and 3 sign-on
configurations to 3-2.
6 14 Jun 99 Title change, Removed MT-211 and RS-232; Sec 1, Table 1-1, added Pin List for
Cable 21040077, added RS-232 Communication; Sec 2, added Demo Program from
Net; Sec 3, Clarified Fig 3-1, Described firmware P/Ns and revisions.
7 1 Dec 99 Section 1: Added P/N 21040084, Updated table for 9- and 25-pin connectors; Section
3: Added P/N 21040084 to Sign-on table.
8 21 Sep 00 Editorial changes throughout. Sec 1: Configuration list expanded and moved to Sec 3;
Specification weight changed from 5.9 oz to 5.8oz, Converted symbols to Metric
System [SI]. Sec 3: Added 5 new part numbers with firmware, tracks, and
configurations.
9 09 Mar 01 Front Matter: Corrected Agency Approvals to include Class B for FCC and Class B
for CE. Changed RMA Warranty address to 20801 S. Annalee. Section 3: Removed
“Track 3 – 7 bit” line from Table 3-1. Added 094 and 096 configurations in Table 3-2.
10 25 Jul 01 Front Matter: Agency Approvals: Corrected Class B for CE and Corrected UL and
CUL. Copyright 2001 added.
11 24 Apr 03 Front Matter: added ISO line to logo, changed Tech Support phone number, added
new warranty statement; Sec 3: added 2 new part numbers at the end of Table 3-2.
12 23 Jun 03 Editorial throughout. Section 3: Removed the following parts from Table 3-2:
21040073, 21040077, 21040084, 21040089.
13 11 May 04 Sec 1: Specifications, corrected cable length.
14 10 Jan 06 Updated specifications to reflect new models. Added commands to support
modification of properties (Section 4).
15 23 Feb 06 Sec 3: Timing for Sign-on ID changed from 150 to a range from 150 to 330ms. Sec 4:
Sending of <CR> when using Reset Device Command follows SB switch setting.
16 2 Feb 07 Clarified port powered operation
17 1 Jun 10 Formatting changes and updated Limited Warranty & Agency Approvals. Removed
PN 21040088.