Switch b – MagTek PORT POWERED SWIPE READER User Manual
Page 25
Section 4. Properties and Commands
19
Switch B
Switch B, Table 4-2, is used to define the bracketing characters that are used in the messages.
The default for Switch B is:
00000001
Send CR after messages but don’t send STX, ETX, ESC, LRC
Table 4-2. Switch B
Command position
1
2
3 4 5 6 7 8
Byte Position
7
6
5 4 3 2 1 0 Description
0 Send CR after messages: No
1 Send CR after messages : Yes
0
Send STX before data: No
1
Send STX before data: Yes
0
Send ETX before data: No
1
Send ETX before data: Yes
0
Send ESC before data: No
1
Send ESC before data: Yes
0
Send LRC with track data: No
1
Send LRC with track data: Yes
X
Reserved
X
Reserved
X
Reserved