MagTek USB HID SURESWIPE & USB HID SWIPE READER User Manual
Page 2
ii
Copyright
©
2001-2012
MagTek
©
, Inc.
Printed in the United States of America
Information in this document is subject to change without notice. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose,
without the express written permission of MagTek, Inc.
MagTek is a registered trademark of MagTek, Inc.
USB (Universal Serial Bus) Specification is Copyright© 1998 by Compaq Computer Corporation, Intel
Corporation, Microsoft Corporation, NEC Corporation.
REVISIONS
Rev Number
Date
Notes
1
15 Jun 01
Initial Release
2
22 Jun 01
Section 4. On Tracks 1, 2, and 3 Decode Status delete “more than
eight bits of data” and add “data on it that is not noise.” From Card
Encode Type, Value 3, delete “This device does not detect blank
cards so this value will never occur.”
3
25 Jul 01
Front Matter: Agency Approvals: Corrected Class B for CE.
4
17 Aug 01
Section 4, Report Descriptor: Changed Logical Maximum from 25 ff
to 26 ff 00.
5
12 Dec 02
Section 4, Command Number: Corrected GET and SET
PROPERTY descriptions.
6
28 Jan 03
Changed copyright symbol so pdf copies would print on all printers
7
03 Jun 03
Front Matter: added ISO line to logo, changed Tech Support phone
number, added new warranty statement.
8
17 May 05
Included references to new commands added after June 2005. Sec
4: Replaced all of Section 4.
9
22 Nov 05
Sec 1: To Hardware Configuration Table, added P/N 21040139.
Corrected cable descriptions for Models 21040119 and 21040139.
10
30 Aug 06
Added dual head models 21040140 and 21040146
11
19 Mar 07
Add SureSwipe title and content
12
23 Mar 09
Added MTBF Specification; updated warranty and agency approval
information
13
4 Jan 12
Added Host Poll Timeout Property (0x52); removed references to
part numbers 21040113,-14, -43; updated figures to be more
readable