MagTek USB (UNIVERSAL SERIAL BUS) KEYBOARD EMULATION - Manual (Page 23)

Section 4. USB Communications
15
Property ID is a one byte field that contains a value that identifies the property. The following
table lists all the current property ID values:
Value Property ID Description
0 SOFTWARE_ID The device’s software identifier
1 SERIAL_NUM The device’s serial number
2 POLLING_INTERVAL The interrupt pipe’s polling interval
3 TRACK_ID_ENABLE Track enable / ID enable
4 TRACK_DATA_SEND_FLAGS Track data send flags
5 TERMINATION_CHAR Terminating char / per track or card flag
6 SS_TK2_7BITS Start sentinel char for track 2 – 7 bit data
7 SS_TK3_CADL Start sentinel char for track 3 – CA drivers
license
8 SS_TK3_ISO_ABA Start sentinel char for track 3 – ISO/ABA
9 SS_TK3_AAMVA Start sentinel char for track 3 - AAMVA
10 SS_TK3_7BITS Start sentinel char for track 3 – 7 bit data
11 PRE_CARD_CHAR Pre card char
12 POST_CARD_CHAR Post card char
13 PRE_TK_CHAR Pre track char
14 POST_TK_CHAR Post track char
The Property Value is a multiple byte field that contains the value of the property. The number
of bytes in this field depends on the type of property and the length of the property. The
following table lists all of the property types and describes them.
Property Type Description
Byte
This is a one byte value. The valid values depend on the property.
String This is a multiple byte ASCII string. Its length can be zero to a
maximum length that depends on the property. The value and
length of the string does not include a terminating NUL character.
SOFTWARE_ID PROPERTY
Property ID:
0
Property Type: String
Length: Fixed at 11 bytes
Get Property: Yes
Set Property: No
Description: This is an 11 byte read only property that identifies the software part
number and version for the device. The first 8 bytes represent the part number and the last 3
bytes represent the version. For example this string might be “21042802A05”. Examples
follow:
Example Get SOFTWARE_ID property Request (Hex):
Cmd Num Data Len Prp ID
00 01 00
Example Get SOFTWARE_ID property Response (Hex):
Result Code Data Len Prp Value
00 01 32 31 30 34 32 38 30 32 41 30 35