MagTek USB MagneSafe V5 Flash - Manual (Page 8)

Flash MagneSafe Swipe Reader
2
FEATURES
Major features of the Flash MagneSafe Reader are as follows:
•
Powered by a rechargeable battery; recharging can be provided via a standard USB cable
•
Compatible with any device having a host USB (Universal Serial Bus) interface
•
Bi-directional card reading
•
Reads encoded data that meets ANSI/ISO/AAMVA standards and some custom formats such
as ISO track 1 format on track 2 or 3
•
Reads up to three tracks of card data
•
Red/Green/Amber LED for status
•
Non-volatile memory for property storage
•
Non-volatile storage of transaction data even if the battery becomes discharged (up to 71
transactions can be stored before downloading to a host)
•
Hundreds of transactions can be processed on a single charge
•
Industry standard USB micro-B connector
•
Compatible with USB specification Revision 1.1
•
Compatible with HID specification Version 1.1
•
Can use standard Windows HID driver for communications; no third party device driver is
required
•
Programmable USB Interrupt In Endpoint polling interval
•
Supplies 54 byte MagnePrint™ value
•
Contains a unique, non-changeable device serial number which allows tracking each reader
•
Encrypts all track data and the MagnePrint value
•
Provides clear text confirmation data including card holder’s name, expiration date, and a
selectable portion of the PAN as part of the Masked Track Data
•
Provides MagneSafe 2.0 format
HARDWARE CONFIGURATION
The hardware configuration is as follows:
Part Number Tracks Style Interface Cable
21073081 1, 2, 3 Portable USB N/R*
* No cable is required to operate the reader but one of the cables listed
below can be used to retrieve transactions and to charge the battery.
ACCESSORIES
The optional accessories are as follows:
Part
Number
Description Notes
21051543 USB-A TO USB-Micro-B Black, 700mm Retractable Cable Optional Cable
21051548 USB-A TO USB-Micro-B Black, 6’ Cable Supplied with reader