Section 4: connecting the system, Getting started (usb), Getting started (mobile device) – MagTek uDynamo User Manual
Page 12: Section 4, Connecting the system
6
SECTION 4: CONNECTING THE SYSTEM
GETTING STARTED (USB)
The uDynamo works with hosts that support USB HID including Windows, Mac OS X and
Linux.
1.
Install the appropriate MagTek demo application for your system. (Windows and OS/X
only).
2.
Using the included Micro-USB cable (Micro-B), connect the uDynamo to a host USB
port on your system.
3.
Run the MagTek demo application.
You are now ready to swipe credit cards using your new uDynamo.
GETTING STARTED (MOBILE DEVICE)
The uDynamo connects to the host by plugging the integral audio connector into the host’s audio
connection. The uDynamo works with iOS* and many Android devices.
1.
Install the appropriate MagTek demo or custom application.
2.
Disconnect any headsets or devices that may be connected to the audio jack of your
mobile device.
3.
Connect the uDynamo to the audio jack of your mobile device.
4.
Run the MagTek demo or custom application.
You are now ready to swipe credit cards using your uDynamo.
Note
When the uDynamo is plugged into a Mobile device while the mobile App is
already launched, volume will automatically be adjust to the maximum.
* Some communication problems with the iPhone 4 have been discovered when using a WiFi
connection. It may require a few retries to complete a transaction.