MagTek uDynamo - Manual (Page 13)

7
SECTION 5: USE OF THE DEMONSTRATION
APPLICATIONS
USB READER MODE
MagTek has created a demonstration program for Windows and Mac OS X that can be used to
demonstrate the features of the uDynamo, and to verify its proper operation. Once the program
is launched, it continually checks for the existence of a USB HID reader. The user interface
provides the connection status in the display.
MOBILE DEVICE MODE
MagTek has created a demonstration program for iOS devices that can be used to demonstrate
the features of the uDynamo, and to verify its proper operation. Once the program is launched, it
continually checks for the existence of an audio reader. The user interface provides the
connection status in the display.
Figure 2 Demonstration GUI showing the connection status of the reader.
If a reader is attached and the demonstration software reflects “Device Connected”, but there is
no response from the reader after a card swipe
, it is possible that the media volume for the phone
is turned down or is muted. Using the phone or tablet controls, turn the media volume to
maximum.
When the reader is attached and is detected, swiping a card through the reader will cause the data
from that card to be read. When the card swipe is detected, the GUI will indicate that the card