Waterloo F1521A1-4 - Manual (Page 7)

7
Carefully align slides and
push drawer in until
drawer stops.
STEP 6:
• Insert the drawer slides (Gd) into the workbench slides (Gu)
and push all of the way to the back.
• Pull the drawer open until it stops to ensure proper assembly.
• Repeat for the rest of the drawers.
• Square the unit and adjust for optimum drawer performance.
• Wrench tighten all fasteners.
• Remove drawers. (See drawer removal instructions.)
• Attach K, as shown, using (2) FF, (2) HH and (2) JJ.
• Finger tighten. (Do not wrench tighten until step 6.)
FF
HH JJ
K
FF(2)
JJ(2)
HH(2)
STEP 5 - continued:
H
• Position H as desired.
• Mark centers of (8) square mounting holes.
Square
Mounting
Hole
• Turn H over. (Use packaging material to avoid scratching.)
• Drill (8) 1/8" (3mm) pilot holes 1/2" (13mm) deep.
H
STEP 7: