Waterloo F1972 - Manual (Page 3)

ASSEMBLY
Process:
• Place (2) Backs with flanges up as shown.
(Use packaging material to prevent scratches.)
• Assemble (2) Backs, using (2) 1/4-20 x 3/4" Button Head
Screws, and (2) 1/4-20 Serrated Flange Nuts through
flanges.
• Finger tighten.
Items Needed:
1/4-20 x 3/4" Button Head Screw (Qty: 2)
1/4-20 Serrated Flange Nut (Qty: 2)
Back (Qty: 2)
Process:
• Attach (2) Side Panels using (4) 1/4-20 x 3/4" Button
Head Screws, and (4) 1/4-20 Serrated Flange Nuts
nuts in middle holes of each side.
• Finger tighten.
Items Needed:
1/4-20 x 3/4" Button Head Screw (Qty: 4)
1/4-20 Serrated Flange Nut (Qty: 4)
Side (Qty: 2)
Screw Nut
Backs
Side Panels
Screw
Nut
3
Figure 1
Figure 1.1
Figure 2
Figure 2.1