Wagner SMART Flow Roller - Manual (Page 2)

English 2
Getting
Started
Start Before you begin:
• The Smart Flow Roller requires four (4)
high-quality, alkaline, AA size batteries.
• Make sure the type of paint you use can
be cleaned with either mineral spirits (for
oil-based paints) or a warm water and soap
solution (for latex paints).
• It is a good idea to have drop cloths
protecting your floors and furnishings in
case of accidental spatters.
Batteries may explode or leak and
cause skin burns if recharged,
disposed of in fire, mixed with a
different battery type, inserted backwards or
disassembled. Replace all batteries at the
same time with new batteries. Do not carry
batteries loose in your pocket or purse. Do
not remove battery label.
imPORtant: Some oil-based paints
require a stronger cleaning solution than
mineral spirits and should not be used with
the Smart Flow Roller. Using a cleaning
solution stronger than mineral spirits may
cause damage to the Smart Flow Roller.
Check with your paint supplier to be sure
the oil-based paint you have can be cleaned
with mineral spirits.
Parts and Components
Assembly
1. Install batteries.
Remove plastic bag
from plunger.
2. Lubricate the
plunger O-rings with
petroleum jelly.
5. Attach the roller cover assembly to
the roller arm.
6. Press the quick-release tabs on the
unit and attach the roller arm.
7. If painting a ceiling, attach the
spatter guard.
3. Insert the plunger into the main
tube. make sure O-rings do
not twist or cut.
4. Tighten the locking collar.
Questions?
Call Wagner Technical Service at:
1-800-760-3844
Monday - Friday
8:00 am to 4:30 pm CST
1 2
5 6 7
3 4
Quick-release
tabs
Roller arm
assembly
Spatter
guard
Roller
core
Fill valve
Fill tube
Locking
collar
Manual
override
lever Plunger
Motor switch
Motor housing
Head
Main
tube
Standard
container lid
Non-standard
container lid (not
included with
all models)
Roller
cover
Roller cap