Wagner SMART Roller - Manual (Page 2)

English 2
Getting
Started
Start Before you begin:
• Make sure the type of paint you use can
be cleaned with either mineral spirits (for
oil-based paints) or a warm water and soap
solution (for latex paints).
• It is a good idea to have drop cloths
protecting your floors and anything else in
the room that you do not want accidentally
splattered with paint.
important: Some oil-based paints require
a stronger cleaning solution than mineral
spirits and should not be used with the
Smart roller. Using a cleaning solution
stronger than mineral spirits may cause
damage to the Smart roller. Check with
your paint supplier to be sure the oil-based
paint you have can be cleaned with mineral
spirits.
Parts and Components
Assembly
1. Remove plastic bag from plunger.
Lubricate the plunger O-rings with
petroleum jelly.
4. Attach the roller cover assembly to
the roller arm.
5. Press the quick-release tabs on the
unit and attach the roller arm.
6. If painting a ceiling, attach the
spatter guard.
2. Insert the plunger into the main
tube. make sure o-rings do
not twist or cut.
3. Tighten the locking collar.
Questions?
Call Wagner Technical Service at:
1-800-760-3844
Monday - Friday
8:00 am to 4:30 pm CST
In order to register your product today, visit:
www.wagnerspraytech.com/registration
We value your opinion. To complete your
review, please visit:
www.wagnerspraytech.com/reviews
4 5 6
Quick-release
tabs
Roller arm
assembly
Spatter
guard
Roller
core
Fill valve
Fill tube
Locking
collar
Trigger
Plunger
Head
Main
tube
Standard
container lid
Non-standard
container lid (not
included with
all models)
Roller
cover
Roller cap
1 2 3