Wagner TurboRoll - Manual (Page 2)

English 2
Getting
Started
Start Before you begin:
• The TurboRoll™ requires four (4) high-
quality, alkaline, AA size batteries.
• Make sure the type of paint you use can
be cleaned with either mineral spirits (for
oil-based paints) or a warm water and soap
solution (for latex paints).
• It is a good idea to have drop cloths
protecting your floors and furnishings in
case of accidental spatters.
Batteries may explode or leak and
cause skin burns if recharged,
disposed of in fire, mixed with a
different battery type, inserted backwards or
disassembled. Replace all batteries at the
same time with new batteries. Do not carry
batteries loose in your pocket or purse. Do
not remove battery label.
imPORtant: Some oil-based paints require
a stronger cleaning solution than mineral
spirits and should not be used with the
turboRoll™. Using a cleaning solution
stronger than mineral spirits may cause
damage to the turboRoll™. Check with
your paint supplier to be sure the oil-based
paint you have can be cleaned with mineral
spirits.
Questions?
Call Wagner technical Service at:
1-800-760-3844
Register your product online at:
www.wagnerspraytech.com
Parts and Components
Assembly
1. Install batteries.
Remove plastic bag
from plunger.
2. Lubricate the
plunger O-rings with
petroleum jelly.
5. Attach the roller cover assembly to
the roller arm.
6. Press the quick-release tabs on the
unit and attach the roller arm.
7. If painting a ceiling, attach the
spatter guard.
3. Insert the plunger into the main
tube. make sure O-rings do
not twist or cut.
4. Tighten the locking collar.
1 2
5 6 7
3 4
Quick-release
tabs
Roller arm
assembly
Spatter
guard
Roller
core
Fill valve
Fill tube
Locking
collar
Manual
override
lever Plunger
Motor switch
Motor housing
Head
Main
tube
Standard
container lid
Non-standard
container lid (not
included with
all models)
Roller
cover
Roller cap