Wagner 915 On-Demand Steamer - Manual (Page 4)

English 4
Setup
Start
1. Push the button on the handle
(a) and attach the steam plate,
extensions, or cleaning accessory
to the trigger mechanism.
2. If using the jet nozzle, assemble
the brush onto the nozzle.
Note: When attaching the
nozzle brush to the jet nozzle,
line up the notch in the jet nozzle
end (b) with the guide inside the
nozzle brush (c).
4. Flip up filler cap lid and carefully
unscrew filler cap.
Using the funnel, fill the
steamer with clean tap water
(distilled water recommended).
DO NOT OVeRfill.
3. If using an extension, attach the
accessory to the extension.
5. Use the chart above as a guide
to determine how much water
you will need based on how long
you need to use the steamer.
Replace fill cap and shut filler
cap lid when filled with desired
amount.
6. Plug in the power cord and turn
the switch ON (I). Both the green
and red indicator lights will turn
on.
Once the red indicator light on the
container turns off (d), you are
ready to begin steaming.
Note: When the red light turns back
on, you can continue steaming.
DO NOT fill The sTeameR wiTh
aNy liquiDs excepT cleaN
waTeR. Do not use household
cleaners, bleach or any other
chemicals with this steamer.
Never use more than two
extensions when using the
steamer.
Never attach extensions or
accessories while unit is emitting
steam.
Before you begin:
(a)
1
4
3
Amount of
water
16 oz.
32 oz.
48 oz.
Steam
time
15 min
30 min
45 min
5
(d)
6
2
(b)
(c)