Legacy Classic Furniture Nursery Crib Drawer 490-8910C - Manual (Page 3)

Assembly Instruction 490-8910 CRIB DRAWER
Page 3 of 5
3. Slide the Bottom panel (F) onto the groove of the Left Side Panel (C), Right Side Panel (D) and Back panel
(B). Connect these panels together with Cam Nut (J) using Screwdriver to tighten. (See Fig 2)
4. Assemble the end of Divider (E) into the Back Panel with Bolt (H) using Allen key (M).
5. Assemble the Front Side Panel (A) into the Left Side Panel (C), the Right Side Panel (D) and the Divider
(E) with same Cam Nut (J) using Screwdriver to tighten. (See Fig 3)
Fig (1)
Fig (2)