Horner APG QX351 OCS HEQX351C103 - Manual (Page 40)

CH.9 MAN0892-03-EN
February 25, 2010 Page 40 of 109 # 1039
Figure 9.4: Base 2 Selected
Double-click on a slot or press the Config button located next to the slot. The following screen appears.
Select a tab at the top of the screen, and then select an I/O module. (For this example, the DIQ611 is
going to be selected.) Press OK.
Figure 9.5: Selecting an I/O Module