Horner APG QX351 OCS HEQX351C103 - Manual (Page 82)

CH. 13 MAN0892-03-EN
February 25, 2010 Page 82 of 109 # 1039
Now that you know which COM port the QX351 is plugged to, go to Cscape, Tools, Editor Options,
Communications Port and choose the correct COM port (in this example Com 3).
If communications are successful, the target indicator should show the mode of the controller Target:
yy(R) as shown in the status section
above in this chapter, section Cscape Status Bar . (12.2)