Horner APG XLt OCS HE-GSM04 - Manual (Page 51)

MAN4005-04-EN GPRS / GSM MODEM Configuration PAGE 51
11. AT+CMGL List Messages
AT+CMGL List Messages
Command Function List messages from storage.
Command Functional Group Short Message Services
Command Format Query
Response AT+CMGL=?
+CMGL: (“REC UNREAD”,”REC
READ”,”STO UNSENT”,”STO
SENT”,”ALL”)
OK
Write Format
Response
N/A
N/A
Read Format
Response N/A
N/A
Execution Format
Response AT+CMGL =<stat>
+CMGL: <index>, <stat>, <da/oa>,
[<alpha>, <scts>, <tooa/toda>, <length>]
<CR><LF> data
OK
Parameter Values See Notes
<index> Memory location integer
<stat> Status of message
“REC UNREAD”
“REC READ”
“STO UNREAD”
“STO READ”
“ALL”
<do/oa> destination address
<alpha> alphanumeric representation of <da> or <oa> corresponding to the entry found in
MT phonebook
<scts> Service center time stamp
<tooa/toda> Address Type-of-Address octet in integer format
<length> Length of message in octets
Above settings for <stat> assume
AT+CMGF=1 (text mode). For
AT+CMGF=0 (PDU mode), the following
<stat> values are supported: 0,1,2,3,4.
Parameters in [] may or may not be reported dependent upon the setting
of AT+CMGF.
0 “Rec Unread”
1 “Rec Read”
2 “Sto Unsent”
3 “Sto Sent”
Notes
4 “ALL”
Page 51 of 62 ECN # 956