Siemens TE506519DE - Manual (Page 44)

40
de en
Problem Cause Solution
Display shows
Refill beans!
although
the bean container (1)
is full, or the grinding
unit does not grind the
beans�
Beans are not falling into
the grinding unit
(beans too oily)�
Gently tap the bean container (1)�
Change the type of coffee if
necessary�
When the bean container (1) is
empty, wipe it with a dry cloth�
No hot water
dispensed�
The milk frother (6) is
soiled�
Clean the milk frother (6), see “Main-
tenance and daily cleaning”�
Too little or no milk
froth
or
the milk frother (6)
does not draw the milk
in�
The milk frother (6) is
soiled�
Clean the milk frother (6), see “Main-
tenance and daily cleaning”�
Milk unsuitable for frothing� Use low-fat milk (1�5 % fat)�
The milk frother (6) is not
correctly assembled�
Wet the milk frother parts and press
together firmly.
Build-up of limescale in the
appliance�
Descale the appliance as described
in the instructions�
Coffee dispensing
slows to a trickle or
stops completely�
Coffee is ground too finely.
Pre-ground coffee is too
fine.
Adjust the grinding unit to a coarser
setting� Use coarser pre-ground
coffee�
Build-up of limescale in the
appliance�
Descale the appliance as described
in the instructions�
Coffee has no “crema”� Unsuitable type of coffee� Use a type of coffee with a higher
proportion of robusta beans�
The beans are no longer
fresh�
Use fresh beans�
The grinding setting is not
suitable for the beans�
Adjust grinding setting to fine.
Coffee is too “acidic”� The grinding setting is too
coarse or the pre-ground
coffee is too coarse�
Adjust the grinding unit to a finer
setting or use finer pre­ground
coffee�
Unsuitable type of coffee� Use a darker roast�
Coffee is too “bitter”� The grinding setting is
too fine or the pre-ground
coffee is too fine.
Adjust the grinding unit to a coarser
setting or use coarser pre-ground
coffee�
Unsuitable type of coffee� Change type of coffee used�
Display shows
Error
Call hotline The appliance has a fault� Please call the hotline�
The water filter does
not stay in position in
the water tank (17)�
The water filter is not
mounted correctly�
Firmly press the water filter straight
down into the tank connection�
If you are unable to solve the problem, always call the hotline!
You will find the telephone numbers at the back of these instructions.
Simple troubleshooting