Acer Altos R910 Series - Manual (Page 52)

3 System upgrade 42
Removing a memory board air baffle
You will need to remove the memory board air baffle to perform the
following procedures:
• Removing and installing a memory board
• Removing and installing a PCI card
To remove the memory board air baffle
1 Observe the ESD precautions and pre-installation instructions
described on page 33.
2 Insert your fingers into the two holes on the top of the memory
board air baffle, then push the tab (A).
3 Lift the memory board air baffle from the server (B).