Acnodes RMC 7182 - Manual (Page 56)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7182
1U Rackmount System
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located beside the VGA port) have
two LEDs. On each port, one LED indicates activity
while the other LED may be green, amber or off to
indicate the speed of the connection. See the table on
the right for the indication associated with the connec-
tion speed LED.
IPMI Dedicated LAN LEDs
In addition to LAN1/LAN2, a dedicated IPMI LAN port
is also provided on the motherboard. The yellow LED
indicates activity, while the green LED indicates the
speed of the connection. See the table at right for
more information.
Onboard Power LED (LE1)
An Onboard Power LED is located at LE4 on the
motherboard. When LE4 is on, the AC power cable is
connected. Make sure to disconnect the power cable
before removing or installing any component. See the
table on the right for more details.
UID LED
The rear UID LED is located at LE5 on the backplane.
This LED is used in conjunc- tion with the front UID
LED and the rear UID switch to provide easy identifi-
cation of a system that might be in need of service.