Asus A8N32-SLI - Manual (Page 109)

A S U S A 8 N 3 2 - S L I D e l u x e A S U S A 8 N 3 2 - S L I D e l u x e A S U S A 8 N 3 2 - S L I D e l u x e A S U S A 8 N 3 2 - S L I D e l u x e A S U S A 8 N 3 2 - S L I D e l u x e 4 - 4 1 4 - 4 1 4 - 4 1 4 - 4 1 4 - 4 1
To set a User Password:
1. Select the Change User Password item and press <Enter>.
2. On the password box that appears, type a password composed of at
least six letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you set your password
successfully.
To change the user password, follow the same steps as in setting a user
password.
Password Check [Setup] Password Check [Setup] Password Check [Setup] Password Check [Setup] Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the
Setup utility. When set to [Always], BIOS checks for user password both
when accessing Setup and booting the system.
Configuration options: [Setup] [Always]