Save these instructions – LBL Lighting Rhythm PCF User Manual
Page 2
2
THUMB SCREW
BRACKET
GLASS SHADE
Place the glass shade onto the bracket and align the glass shade
holes with the bracket holes.
Tighten the three thumb screws with washers through the
glass shade holes completely into the bracket holes to secure
the glass shade in place.
Refer to the instructions provided with the canopy to install
the fixture.
NOTE:
Do not over tighten the thumb screws.
Overtightening may break the glass and result in injury.
WASHER
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
1B
2
3
4
3
3
2