Save these instructions – LBL Lighting Icicle II SPCF User Manual
Page 2
2
THUMB SCREW
SOCKET BRACKET
GLASS SHADE
SOCKET
Place the glass shade onto the socket bracket and align the
glass shade holes with socket bracket holes.
Tighten the three thumb screws through the glass shade holes
completely into the socket bracket holes to secure the glass
shade in place.
Refer to the instructions provided with the canopy to install
the fixture.
NOTE:
Do not over tighten the thumb screws which may
cause the glass shade to break.
NOTE:
To replace the lamp, remove the thumb screws to
remove the glass shade and lamp, and repeat steps 1
through 3.
1B
2
3
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
3
3