1e 1d – LBL Lighting Dome-S-I Grande SF User Manual
Page 2
2
From the end of the cord, carefully slide the outer glass shade
and cap completely down and lay it on the threaded nipple
assembly.
Secure the outer glass shade in place by tightening the cap to
threaded nipple assembly
CORD
SOCKET
OUTER GLASS
SHADE
INNER GLASS
SHADE
THREADED
NIPPLE ASSEMBLY
From the end of the cord slide the stem completely down into
the cap.
CORD
STEM
LAMP
Use
120 Volt,
Watt Type T4,
MAX
60
G9 Base, Bi-Pin Halogen Lamp.
Push the lamp pins completely into the socket holes .
Refer to the instructions provided with the canopy to install
the fixture.
NOTE: The G9 lamp has an integral glass envelope and is
thus safe to be used without a lamp shield.
NOTE:
To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
CAP
1C
3
3
1E
1D
4
5
3
4
5
6
6
7