LBL Lighting Vitre Square S - Manual

1A
1
Install the Mounting Plate
Separate the mounting plate from the canopy by
removing the two canopy screws.
CANOPY
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product may be dimmed with a low-voltage electronic dimmer.
Suspension
Vitre Suspension (Square)
1.1
SU831_
Installation Instructions for 980VITRESS
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1B
Secure the mounting plate to the electrical box with the
two #8-32 screws provided. 2
CANOPY
SCREW
CANOPY
SCREW
MOUNTING
PLATE
MOUNTING
PLATE
#8-32 SCREW
#8-32 SCREW