LBL Lighting Tessa 8-Light S - Manual (Page 3)

3
3B
2 4 Place all wire and wire nut connections inside the
canopy.
Align the canopy holes with the crossbar holes. Secure
the canopy in place by tightening the four screws. 2 5
SCREW SCREW
Install the Fixture
2C
POWER CABLES
POWER CABLES
STEM
3 3 Feed the power cables from the fixture completely
through the stems.
FIXTURE
2D
3 4 Screw the stems tightly onto the fixture.
FIXTURE
4
4
3A
1
2 1
2 2
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the black fixture wire(s) to the hot power line
wire with a wire nut.
Connect the white fixture wire(s) to the neutral power
line wire with a wire nut. 2 3
NOTE: 6 light fixture only has one set of power
cords.
2
3
NOTE: 6 light fixture only has one set of power
cords.