LBL Lighting Hollywood Beach SP - Manual (Page 2)

2
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2012 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
1C
2 Install the shade by sliding onto the socket assembly.
Re-tighten the shade cap to secure the lamp shade.
SHADE
FRAME
4
2 5
Install the Diffuser
TOP VIEW
SHADE
FRAME SOCKET
ASSEMBLY
SOCKET
ASSEMBLY
THUMB
SCREWS
2A
2 Unscrew and remove the three thumb screws. 1
2B
2 Install the diffuser and align the holes to the pegs on
the shade.
Secure the diffuse by reinstalling and tightening the
three thumb screws.
2
3
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: To re-lamp, reverse the section 2 instructions
to remove the diffuser and gain access to the lamps
and sockets.
PEGS
DIFFUSER