LBL Lighting Hollywood Beach SPCF - Manual (Page 2)

2
1C
2 Install the shade by sliding onto the socket assembly.
Re-tighten the shade cap to secure the lamp shade.
SHADE
FRAME
4
2 5
Install the Diffuser
TOP VIEW
SHADE
FRAME SOCKET
ASSEMBLY
SOCKET
ASSEMBLY
THUMB
SCREWS
2A
2 Unscrew and remove the three thumb screws. 1
2B
2 Install the diffuser and align the holes to the pegs on
the shade.
Secure the diffuse by reinstalling and tightening the
three thumb screws.
2
3
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: To re-lamp, reverse the section 2 instructions
to remove the diffuser and gain access to the lamps
and sockets.
PEGS
DIFUSSER