Replacing the lamp – LBL Lighting Mademoiselle No. 2 User Manual
Page 3
Advertising
![background image](/manuals/415106/3/background.png)
3
Replacing the Lamp
CRYSTAL WEB
NOTE:
To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Lift the crystal web up to expose the lamp and socket.
SOCKET
1
3A
1
1
SOCKET
LAMP
1
3B
NOTE:
Use only your fingers to replace the lamp.
Remove the old lamp.
Push the new lamp pins completely into the socket holes.
2
3C
4
Lower the crystal web and drape it over the socket and lamp.
3
Use
MAX 50 Watt
MR16 Front Cover
Halogen Lamp.
2H
Firmly tighten the set screw on the conical connector.
10
10
Pull the coaxial cable toward the fixture to smooth the
wrinkles.
2I
11
11
Advertising
This manual is related to the following products: