LBL Lighting Corinna - Manual (Page 3)

3
Replacing the Lamp
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
First slide the stem up, them lift the glass shade up to expose
the lamp and socket.
1
1
SOCKET
LAMP
1
3B
NOTE: Use only your fingers to replace the lamp.
Remove the old lamp.
Push the new lamp pins completely into the socket holes.
Use Type Xelogen MAX 50 Watt
(Xenon) Bi-Pin Lamp.
2
CAUTION: RISK OF FIRE
Never replace a Xenon lamp with a regular Halogen lamp.
A Halogen lamp requires a protective glass shield.
4 Lower the glass shade until the socket is properly inside the
socket housing.
Slide the stem back down in place.
3
2H
Firmly tighten the set screw on the conical connector.
10
10
Pull the coaxial cable toward the fixture to smooth the
wrinkles.
2I
11
11
3A
GLASS SHADE
SOCKET
1
STEM
3C
GLASS SHADE
SOCKET
4
STEM
1
SOCKET HOUSING
5
5