LBL Lighting Mini-Someday - Manual (Page 3)

3
Install the Lamp
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Lift the and glass shade up to expose the socket fixture frame
assembly.
LAMP
1 1
3A
3B
1
2
NOTE: Use only your fingers to replace the lamp.
Screw the lamp into the socket. 2
GLASS SHADE
SOCKET
FIXTURE FRAME
SOCKET
The lamp is rated at 6 watts at 12 volts.
3
3C
Gently lower the fixture frame and glass shade until they rest
properly on the socket assembly.
NOTE: To re-lamp, reverse section 3 instructions.
SOCKET
GLASS SHADE
FIXTURE FRAME