Install/replace the lamp – LBL Lighting Lexum User Manual
Page 3
Advertising
3
Install/Replace the Lamp
NOTE:
To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Slide the pendant up to expose the lamp and socket.
1
2A
SOCKET
SOCKET
LAMP
1
2B
NOTE:
Use only your fingers to replace the lamp.
Remove the old lamp.
Push the new lamp pins completely into the socket holes.
Use
Type Xelogen
MAX 50 Watt
(Xenon) Bi-Pin Lamp.
2
CAUTION: RISK OF FIRE
Never replace a Xenon lamp with a regular Halogen lamp.
A Halogen lamp requires a protective glass shield.
3
4
Lower the pendant until it rests properly on the socket.
2C
1
PENDANT
LAMP
SOCKET
4
PENDANT
LAMP
1
Advertising