LBL Lighting Mini-Rhythm - Manual (Page 3)

3
Replacing the Lamp
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers to replace the lamp.
Remove the old lamp.
Push the new lamp’s pins completely into the socket holes.
Use MAX 50 Watt Type Xelogen
(Xenon) Bi-Pin Lamp.
1
CAUTION: RISK OF FIRE
Never replace a Xenon lamp with a regular Halogen lamp.
A Halogen lamp requires a protective glass shield.
GLASS SHADE
SOCKET
3C
2
LAMP
2H
Firmly tighten the set screw on the conical connector.
10
10
Pull the coaxial cable toward the fixture to smooth the
wrinkles.
2I
11
11