LBL Lighting Cypree Large - Manual (Page 3)

3
Install the Lamp
GLASS SHADE
SOCKET
Lift the glass shade up to expose the socket.
Push the lamp pins completely into the socket holes.
Lower the glass shade onto the stopper.
Check that the lamp is located 3 inches from the bottom of
the glass. If it is not, lift up the glass and adjust the stopper
height.
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers and soft cloth to replace
the lamp.
Use Watt,Type Xelogen MAX 50
(Xenon) Bi-Pin Lamp.
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular
Halogen lamp.A regular Halogen lamp requires a protective
glass shield.
GLASS SHADE
SOCKET
LAMP
STOPPER
2A 2B
2
1
1
2
3
4