LBL Lighting Relic No. 2 - Manual (Page 3)

3
Install the Lamp
OUTER GLASS
SHADE
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Lift both glass shades up to expose the socket assembly.
NOTE:
Due to the low clearance of the construction, feeding the
coaxial cable through the fixture stem may be needed to expose the
socket assembly.
SOCKET
LAMP
Lower both glass shades onto the socket.
GLASS SHADE
SOCKET
SOCKET
1
1
2A
2B
2C
1
3
1
2
3
NOTE: Use only your fingers to replace the lamp.
Push the lamp pins completely into the socket holes.
Use Type Xelogen MAX 50 Watt
(Xenon) Bi-Pin Lamp.
2
CAUTION: RISK OF FIRE
Never replace a Xenon lamp with a regular Halogen lamp.
A Halogen lamp requires a protective glass shield.
INNER GLASS
SHADE
FIXTURE STEM
COAXIAL CABLE