LBL Lighting Mini-Springview - Manual (Page 3)

3
Replacing the Lamp
GLASS SHADE
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Lift the glass shade up to expose the socket assembly.
SOCKET
NOTE: Use only your fingers to replace the lamp.
LAMP
GLASS SHADE
Use MR16 Front Cover MAX 50 Watt
Halogen Lamp.
SOCKET
3A
3B
3C
1
4
Remove the old lamp.
Push the new lamp pins completely into the socket holes.
2
3
Lower the glass shade until the socket is properly inside the
socket assembly.
SOCKET ASSEMBLY
2H
Firmly tighten the set screw on the conical connector.
10
10
Pull the coaxial cable toward the fixture to smooth the
wrinkles.
2I
11
11