LBL Lighting Dahling - Manual (Page 3)

3
Replacing the Lamp
GLASS SHADE
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Lift the glass shade up to expose the lamp and socket.
SOCKET
1
3A
1
1
SOCKET
LAMP
1
3B
NOTE: Use only your fingers to replace the lamp.
Remove the old lamp.
Push the new lamp pins completely into the socket holes.
Use MAX 50 Watt Type Xelogen
(Xenon) Bi-Pin Lamp.
2
CAUTION: RISK OF FIRE
Never replace a Xenon lamp with a regular Halogen lamp.
A Halogen lamp requires a protective glass shield.
GLASS SHADE
SOCKET
3C
4
3
Lower the glass shade until the socket is properly inside the
socket assembly.
3
2H
Firmly tighten the set screw on the conical connector.
10
10
Pull the coaxial cable toward the fixture to smooth the
wrinkles.
2I
11
11