LBL Lighting Tear-SII Coax PCF - Manual (Page 2)

2
Feed the cord into the canopy and plastic strain relief.
Adjust the fixture height and mark the cord below the canopy.
MARKED LINE
PLASTIC STRAIN
RELIEF
CORD
Feed the cord inside the canopy so that the marked line is
exposed behind the canopy.
Hold the plastic strain relief 1/2" above the marked line and
tighten the set screw.
PLASTIC STRAIN
RELIEF
MARKED LINE
Determine the desired fixture height (From the bottom of
glass shade to the top of canopy).
H
1/2"
Slide the canopy up against the plastic strain relief and tighten
the plastic cap on the bottom of the canopy.
CAP
1C
4
5
8
7
1D
1E
1F
9
6
9
6
5
8
7