LBL Lighting Bullé P - Manual (Page 3)

3
Install the Lamp
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
SOCKET
NOTE: Use only your fingers and soft cloth to replace
the lamp.
Use Type Xenon MAX 35 Watt
Bi-Pin Lamp.
Lift the glass shade to expose socket.
Push the lamp pins completely into the socket holes and
tighten the two set screws using the provided Allen wrench.
Make sure the set screw connections are very tight to
avoid heat build up and corrosion.
LAMP
SET SCREW
ALLEN WRENCH
Lower the glass shade onto the socket.
GLASS SHADE
SOCKET ASSEMBLY
WARNING: RISK OF FIRE
Never replace a Xenon lamp with a regular Halogen lamp.
A regular Halogen lamp requires a protective glass shield.
2A
1
1
2
2
3
2B