LBL Lighting Rocket P - Manual (Page 3)

3
Install the Lamp
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture. 1
2A 2C
1
3
1
2
Remove the conical bushing from the metal shade.
METAL SHADE
SOCKET
Lift the metal shade up to expose the socket.
CONICAL BUSHING
METAL SHADE
2B
METAL SHADE
SOCKET
Push the lamp pins completely into the socket holes.
METAL SHADE
LAMP
Lower the metal shade onto the socket assembly and tighten
the conical nut to socket assembly threaded nipple.
Use Watt MR16 Front Cover MAX 35
Halogen Lamp.
COAXIAL NUT
NIPPLE
2D
4
4