LBL Lighting Fiona P - Manual (Page 3)

3
Install the Lamps and Diffuser
NOTE: To reduce the risk of a burn or electric shock
when replacing lamps, turn off the power to the fixture.
Use only your fingers and a soft cloth to install the lamps.
Use type Xenon bi- MAX 35 Watt
pin lamp in each socket.
Place the glass diffuser on the threaded post at the bottom of
the shade, and screw the cap onto the post.
CAUTION: RISK OF FIRE
Never replace a Xenon lamp with a regular Halogen lamp.
A Halogen lamp requires a protective glass shield.
Push the lamp pins completely into the socket holes.
THREADED
POST
DIFFUSER CAP
2A
1
2
2B