LBL Lighting Mini-Hollywood Beach D - Manual (Page 3)

3
Install the Lamp
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers to replace the lamp.
2A
2 Remove the three thumb screws and uninstall the
diffuser. 1
THUMB
SCREWS
DIFUSSER
2B
SOCKET
LAMP
2C
2 Reinstall the diffuser and secure it with the three thumb
screws. 3
Unscrew the old lamp and screw in the new lamp into the
socket.
The lamp is rated at 6 watts at 12 volts.
3