Replacing the lamp & shade – LBL Lighting Ooni P User Manual
Page 3
SOCKET ASSEMBLY
GLASS SHADE
SOCKET BRACKET
Replacing the Lamp & Shade
THREADED CAP
Unscrew the threaded cap from the glass shade.
GLASS SHADE
Lower the socket assembly into the glass shade to free the
socket brackets.
NOTE:
To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE:
Use only your fingers and soft cloth to replace
the lamp.
Handle the new replacement lamp with a soft cloth to prevent
the natural oils on the fingertips from collecting on the lamp.
This will help extend the life of the lamp.
Gently insert the new lamp into the socket.
Use MAX 35 Watt, Bi-Pin Halogen Lamp.
Use MAX 35 Watt, Bi-Pin Halogen Lamp.
Use MAX 35 Watt, Bi-Pin Halogen Lamp.
Use MAX 35 Watt, Bi-Pin Halogen Lamp.
3
Rotate to move the socket assembly from the glass shade.
Remove the old lamp.
Gently insert the socket assembly into the glass shade at an
angle. Rotate so that the socket brackets sit properly around
the glass shade collar.
2A
2D
2E
2F
2B
2C
1
4
5
6
7
3
2
1
3
7