LBL Lighting MO Rmt Elec Xfmr 150w 120v/12v LED - Manual (Page 4)

4
TRANSFORMER
COVER
PHILLIPS SCREW
Connect the 120 volt power line wires at the panel.
After installing the entire system, operate the system for
five minutes. On the low voltage side, all electrical
connection points should be no more than warm to the
touch. If a connection is hot to the touch, retighten the
connection and check to ensure that the temperature
decreases.
Replace the transformer cover and tighten the four
Phillips screws.
12
13
14
1A
1D
14 14
14 14
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.generation-brands.com
© 2012 Generation Brands.All rights reserved.The "Genereation Brands"
graphic is a registered trademark of Generation Brands. Generation Brands
reserves the right to change specifications for product improvements without
notification.
A Generation Brands Company