LBL Lighting MO Telescoping Rigid Standoff - Manual (Page 4)

3
If necessary (Depending on design) rotate the Monorail to the
desired angle or horizontal position.
Tighten the two M3 set screws on housing with the 1.5 MM
Allen wrench to the secure the Monorail in place.
M3 SET
SCREW
1.5 MM ALLEN
WRENCH
M3 SET
SCREW
1.5 MM ALLEN
WRENCH
1A 2A 5C
3
4
3
4
4
4
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!
A Generation Brands Company